The UK’s old copper phone network is being switched off, and it happens everywhere, not just with us. Openreach is retiring copper lines nationally in the coming months, which affects landline calls and any broadband that still runs over the old copper lines rather than fibre. Around 2 million households and businesses are affected across the whole industry, and every provider, not just Fleur, is contacting their customers about it.
A free router upgrade, if you need one
If your current router isn’t compatible with the new line, or you haven’t already been sent one, we’ll upgrade you free of charge. If you’ve already got a suitable router, or one we’ve sent you, there’s nothing more to do.
What’s actually changing
Phone calls move from the old copper line to a digital connection instead, either as part of your fibre broadband or over a dedicated digital line. If you’re already on full fibre, this mostly happens in the background. If you’re still on an older copper-based service, we’ll be in touch to move you onto a suitable replacement before the switch-off date.
What we’ve already done
- Checked what’s available at your address and lined up the right replacement service
- Kept pricing about the same, newer services are often faster for a similar cost
- Set things up so you can either keep your existing number or move to a new line, whichever you tell us you’d prefer
What you need to do
Most customers are moved across automatically as we work through the switch-off area by area, there’s nothing to book or arrange. If we’ve already emailed or texted you about your specific line, follow the link in that message, it’s matched to your address.
A couple more checks before you upgrade
We ask these two questions during checkout, so we can protect your service through the move.- Does anyone in your home use a telecare or personal alarm device (for example, a pendant or fall alarm)?
- Does anyone rely on the landline as their only way to make calls (no working mobile)?
If neither applies, you can go straight through. If either does, we’ll follow up by phone before your switch is completed, there’s no box on the form itself to add further detail, so a call is the best way to tell us more.
Setting up your battery backup
If you take a backup battery, it sits between the wall socket and your router and keeps your broadband running if the power goes off. It takes about five minutes to set up.
Unplug the router
Switch off your broadband router at the socket. Pull out its power plug.
Switch to ON, then plug in
Slide the switch on the battery to ON first. This matters. Then plug the battery into the wall socket.
Connect the router
Plug the router’s lead into the battery using the cable in the box. What goes into the second socket depends on how your broadband reaches the house.
Full fibre homes have a small white box fixed to the wall, usually with the letters ONT on it and two or three small green lights. Your broadband comes in through it.
Connect the ONT box to the second socket on the battery. Then both the router and the ONT stay on when the power goes off.
If there is no box on the wall, your router plugs into the old telephone socket instead, usually low down near the floor.
Connect your phone to the second socket on the battery, so you can still make calls during a power cut.
What the lights mean
Two lights on the front tell you what the battery is doing.
Blue and green together. All is well. The battery is full and your router is running on mains power.
Blue flashing. The battery is charging up. Nothing to do.
Red light on. The mains power is off. The battery is now keeping your broadband going.
No lights at all. The battery has run flat. It will refill once the power comes back.
How much charge is left
Count the small lights that are lit. Each one is a quarter of a full battery.
Please do
- Keep it somewhere clean, dry and dust-free.
- Use it in a normal warm room, between 0 and 35 degrees.
- Use only the cable and accessories that came with it.
- Keep it out of reach of small children.
Please don’t
- Don’t touch it with wet hands, or let it get wet.
- Don’t put it near a flame, a heater or a lit cigarette.
- Don’t open it or try to take it apart.
- Don’t drop it, bend it, or clean it with sprays or solvents.
- Don’t carry on using it after a heavy fall or a spill. Unplug it and have it checked first.
Warmth is normal. It may feel warm while charging or in normal use. If it becomes hot, unplug it and stop using it.
Connecting your phone
Your phone line runs through your broadband router instead of the wall socket. Set your router up first, then connect your phone, using one of the two routes below depending on what you have.
Option 1: Standard connection
Your phone plugs straight into the router.
- 1Plug your phone cable into the Phone 1 port on the back of your router. It’s usually green and on the far left. If there’s more than one, always use the first.
Option 2: Using a handset with a BT phone socket
Your phone plugs in through the VoIP adapter.
- 1Plug your phone cable into the VoIP adapter cable.
- 2Plug the adapter into the Phone 1 port on the back of your router, the green one on the far left.
Frequently asked questions
Will my phone number change?
That’s your choice. When you confirm, you’ll be asked whether you want to keep your existing number on the new line, or move to a new line instead. It doesn’t happen automatically either way.
Will this cost me more?
Pricing stays about the same for the equivalent service. Where a faster or more reliable connection is available at your address for a similar price, we’ll let you know before anything changes.
What happens if I don’t do anything before the switch-off?
Your copper line stops working when the switch-off reaches you, regardless of provider, this is a nationwide network change, not something specific to Fleur. We’d rather move you across on your own schedule than have your line go down unexpectedly, so it’s worth acting before then.
I have a telecare pendant or a monitored alarm, what happens to it?
Tell us before you upgrade. Some alarm and telecare devices need testing or a small adjustment on the new line, and we won’t complete your switch until that’s been checked.
Who do I contact if I’m still not sure?
Get in touch and we’ll get back to you. We’d rather answer a question upfront than have it go wrong on the day.
Comments are closed